Grandstream Networks DP720 Administration Guide

P a g e | 98
DP750/DP720 Administration Guide
Version 1.0.11.4
Note: Make sure that Repeater Mode is enabled on your DP750 Base Station.
Use DP750 Repeater Management to Associate DP760
 Enabling Repeater Management Mode
The following steps illustrate how to enable and use the Repeater Management mode on DP750:
1. Access the Web GUI of your DP750 using the admin’s username and password. (Default username
and password are admin/admin).
2. Navigate to DECT  General Settings and set Enable Repeater Management to Yes.
3. Press Save and Apply, then reboot the unit to apply the new settings.
Figure 39: Repeater Associated Status
 Associating DP760 using Repeater Management Mode on DP750
The repeater management mode displays discovered and paired devices using their name, IP and Mac
addresses and also gives the possibility of associating the DP750 Base Station with DP760 DECT Repeater.
Please refer to following steps in order to associate DP760 with DP750 using repeater management mode:
1. Access the Web GUI of your DP750 using the admin’s username and password. (Default username
and password are admin/admin).
2. Navigate to Status  DECT Repeater Status and select the repeater station from Discovered Devices.

Grandstream Networks DP720 Specifications

General

Brand	Grandstream Networks
Model	DP720
Category	IP Phone
Language	English