Figure 20: Locate Handset via Web UI
Locate via DP750 Base station
1. On DP750 Base station back side, press Radio/Page button .
2. All registered handsets will receive Paging call.
3. Once located, you can end the paging calling by pressing any key on the handsets or by pressing
again Radio/Page button.
Register a SIP Account
DP750 supports up to 10 SIP accounts, 5 handsets. Each Handset can be configured up to 10 accounts.
Please be aware that line settings will be affected by DID settings (hunting group settings) in “DECT - SIP
Account Settings”.
Register Account via Web User Interface
1. Access the Web GUI of your DP750 using the admin’s username and password. (Default username
and password is: admin/admin).
2. Press Login to access your settings and navigate to Profiles tab and select a profile to use.
DP750 supports up to 4 profiles. A profile is a set of settings including general settings, network settings,
SIP setting, audio setting, call settings and ring tones, etc.
A profile can be used with different SIP accounts.
To Next Page
Loading...
Need help?
General
