EasyManuals Logo

Grandstream Networks DP720 Administration Guide

Grandstream Networks DP720
110 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #47 background imageLoading...
Page #47 background image
P a g e | 47
DP750/DP720 Administration Guide
Version 1.0.11.4
DNS Mode
Selects DNS mode to use for the client to look up server. One mode can be chosen.
A Record: resolves IP Address of target according to domain name.
SRV: DNS SRV resource records indicate how to find services for various
protocols.
NAPTR/SRV: Naming Authority Pointer according to RFC 2915.
Use Configured IP: If selected, please fill in Primary IP, Backup IP 1 and
Backup IP 2 to be used for server look up.
Default is A Record.
Primary IP
Specifies primary IP address where the base sends DNS query to, when “Use
Configured IP” is selected for DNS mode.
Backup IP 1
Specifies backup IP 1 address where the base sends DNS query to, when “Primary
IP” is not responding.
Backup IP 2
Specifies backup IP 2 address where the base sends DNS query to, when Backup
IP 1” is not responding.
NAT Traversal
Enables/disables NAT traversal mechanism. If activated (by choosing “STUN”) and
a STUN server is also specified (Maintenance Network Settings STUN
Settings); the base performs according to STUN client specification. Under this
mode, embedded STUN client will detect if and what type of firewall/NAT is being
used. If detected NAT is a Full Cone, Restricted Cone, or a Port-Restricted Cone,
the base will use its mapped public IP address and port in all of its SIP and SDP
messages. If NAT Traversal field is set to Keep Alive”, the base will periodically
(every 20 seconds) send a blank UDP packet (with no payload data) to SIP proxy
to keep the “ping hole” on the NAT open.
Use NAT IP
Defines NAT IP address used in SIP/SDP messages. It should only be used if
required by ITSP.
Proxy-Require
Determines a SIP Extension to notify the SIP server that the base is behind a
NAT/Firewall.
SIP Settings – Basic Settings
SIP transport
Selects transport protocol for SIP packets; UDP or TCP or TLS. Make sure your
SIP server or network environment supports SIP over the selected transport
method. Default is UDP.
SIP Registration
Controls whether to send SIP REGISTER messages to the proxy server. Device
may not be able to make/receives calls if disabled. Default is Yes.

Table of Contents

Other manuals for Grandstream Networks DP720

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Grandstream Networks DP720 and is the answer not in the manual?

Grandstream Networks DP720 Specifications

General IconGeneral
BrandGrandstream Networks
ModelDP720
CategoryIP Phone
LanguageEnglish

Related product manuals