Grandstream Networks DP720

P a g e | 64
DP750/DP720 Administration Guide
Version 1.0.11.4
Delete
Deletes previously uploaded handset firmware.
Automatic
Upgrade
Enables automatic upgrade when the handset detects the new
firmware.
Provisioning
XML Config File
Password
Decrypts XML configuration file when encrypted.
The password used for encrypting the XML configuration file is using OpenSSL.
HTTP/HTTPS User
Name
Enters user name to authenticate with HTTP/HTTPS server.
HTTP/HTTPS
Password
Enters password to authenticate with HTTP/HTTPS server.
Always send HTTP
Basic Authentication
Information
Includes configured user name and password in HTTP request before receiving
authentication challenge from the server.
Default is No.
Verify host when
using HTTPS
Verifies host name in server certificate when using HTTPS.
Default is Yes.
Provisioning via
Choose the method that the base station uses to request handset ipei config file.
Can use TFTP, HTTP,FTP,FTPS or HTTPS.
Config Server
Path
Sets IP address or domain name of configuration server. The server hosts a
copy of the configuration file to be installed on the DP750.
Default is fm.grandstream.com/gs.
Note: Make sure to not prepend address with "http://" or any other protocol.
Config File Prefix
Checks if configuration files are with matching prefix before downloading them.
This field enables user to store different configuration files in one directory on the
provisioning server.
Config File Postfix
Checks if configuration files are with matching postfix before downloading them.
This field enables user to store different configuration files in one directory on the
provisioning server.
Enable Handset
Config Upgrade
Checks to allow handset config upgrade for handset related settings.
Default is No.