P a g e | 26
• 802.1x mode
This option allows the user to enable/disable 802.1x mode on the phone. The default setting is disabled.
To enable 802.1x mode, select the 802.1x mode and enter the required configuration depending on the
802.1x mode chosen. The available modes are EAP-MD5, EAP-TLS and EAP-PEAP
Proxy Settings
For some network setup, it is required to connect to the Internet via proxy server. Manually configure "Proxy
hostname", "Proxy port" and "Bypass proxy for" in proxy settings for the phone to get Internet connection
successfully.
Tethering & Portable Hotspot
The GXV3370 can serve as a Wi-Fi access point for other devices to provide wireless access to the network
if the Portable Wi-Fi hotspot is turned on.
1. Turn on hotspot by tapping on "Portable Wi-Fi hotspot". Icon will show on the top status bar.
2. Tap on "Set up Wi-Fi hotspot" to configure network SSID, security type and password. Please make
sure the password has at least 8 characters. Otherwise, users won't be able to save the setting.
3. Tap on “Hotspot & tethering settings” and choose either to set up the hotspot for IPV4 only or for IPV4
& IPV6
4. On the other device that needs Wi-Fi access, turn on Wi-Fi, look for the SSID of the GXV3370 hotspot
and enter authentication information to get connected.
Figure 6: GXV3370 Wi-Fi Hotspot
To Next Page
Loading...
Need help?
General
