P a g e | 29
• Use 24-hour format. Check/uncheck to display the time using 24-hour time format or not. For example,
in 24-hour format, 13:00 will be displayed instead of 1:00 p.m.
• Select date format. Select the format of year, month and day for the date to be displayed.
Bluetooth
• Bluetooth. Tap on "Bluetooth" to turn on/off Bluetooth connection. By default, it's turned off.
• Enable handsfree mode. Tap on Enable handsfree mode to activate it.
• Show received files. Shows the Transfer history of Bluetooth files
• Additional Settings. this menu is available only when the Bluetooth is enabled:
- Device Name. Tap to change the name of the GXV3370, which is displayed on other Bluetooth
devices when discovered. By default, it's "GXV3370_XXXXXX" Where XXXXXX are the last 6 digits
of the phone’s MAC address.
- Visibility timeout. Tap to select the timeout interval among "2 minutes", "5 minutes", "1 hour" or
"never". By default, the visibility timeout is 2 minutes.
- Visibility to nearby Bluetooth devices. Sets the visibility of the phone to other Bluetooth devices.
Normally this option is enabled during pairing process so that other Bluetooth devices can discover
the GXV3370.
- Available devices. This section will show the available devices for pairing. Tap on to initiate
scan process on the GXV3370 to discover the Bluetooth devices within the range.
System
Security Settings
• Device Security-Screen lock. Set up pattern or password for screen lock. Wizard will be provided to
set up the pattern. The screen will be locked after booting up or the screen is off (i.e., screensaver
screen activated, or manually slide down Status Bar→Screen Off to turn off LCD). Users will
then be required to enter password or pattern to login. When the screen is locked, users can still be
able to answer or reject incoming call.
• Passwords-Make passwords visible. Check/uncheck to show/hide letters when user’s type screen
lock password instantly.
To Next Page
Loading...
Need help?
General
