GXV3370 Administration Guide
Version 1.0.1.12
P a g e | 61
System Settings/Wi-Fi Settings
Enables/disables the Wi-Fi feature. The default setting is "Disable".
Permits to scan and select the available Wi-Fi networks within the range if
the Wi-Fi feature is enabled. Click on "Select" to select the Wi-Fi network
to connect to. The ESSID will be auto filled in the ESSID filed.
Determines the ESSID of the selected Wi-Fi network. It can be auto filled
by clicking the select button on the web page.
Determines the password for the selected Wi-Fi network.
Security Mode for
Hidden SSID
Defines the security mode used for the wireless network when the SSID is
hidden. Default is “None”.
Layer 2 QoS 802.1p
Priority Value (Wi-Fi)
Assigns the priority value of the Layer 2 QoS packets for Wi-Fi.
The Default value is 0.
Configure Wi-Fi country code. The default value is "US".
Note: Reboot is requested to take effect.
System Settings/OpenVPN® Settings
This enables/disables OpenVPN® functionality and requires the user to
have access to an OpenVPN® server. The default setting is No. NOTE: To
use OpenVPN® functionalities, users must enable OpenVPN® and
configure all the settings related to OpenVPN®, including server address,
port, OpenVPN® CA, certificate and key. Additionally, the user must also
set the SIP account to use "VPN" for the "Nat Traversal" (under Account->
Network Settings).
The URL/IP address for the OpenVPN® server.
The network port for the OpenVPN® server. By default, it is set to 1194.
Determines network protocol used for OpenVPN®.
OpenVPN® CA file (ca.crt) required by the OpenVPN® server for
authentication purposes. Press "Upload" to upload the corresponding file
to the device.
OpenVPN® Client
Certificate
OpenVPN® Client certificate file (*.crt) required by the OpenVPN® server
for authentication purposes. Press "Upload" to upload the corresponding
file to the device.
To Next Page
Loading...
Need help?
General
