P a g e | 28
• Keyboard & input methods
Set up default input method for virtual and physical keyboard and the different parameters of the related
to the Keyboard use. The default input method is Android Keyboard.
- Virtual Keyboard:
▪ Android keyboard(AOSP): Set up the language used on Android keyboard and configure
its different parameters including sound, auto-correction, word suggestion and so on.
▪ Manage Keyboards. Tap on the + sign to choose which keyboard to use on the phone
- Physical Keyboard: When the physical key board is connected to the phone, users will have the
possibility to choose a keyboard among the available ones on the virtual keyboard
▪ Show virtual Keyboard: this option gives the possibility if keep showing the virtual
keyboard even if the physical one is connected to the phone
▪ Keyboard shortcuts helper: Display available shortcuts.
• Speech-Text to Speech Input.
- Prefer engine. Select the engine type. The default engine is Pico TTS.
- General:
- Speech Rate. Adjust the speech rate.
- Pitch: Sets the speech pitch for the Text-To-Speech engine.
- Reset Speech Rate: Reset the speed at which the text is spoken to normal.
- Reset speech pitch: Reset the pitch at which the text is spoken to default.
- Listen to an example: Play and listen the example of speech synthesis.
- Default Language Status: Indicates if the language used is supported or not.
• Pointer Speed. Adjust the sensitivity of the mouse pointer.
Date & Time
• Enable and use specified NTP server address. Assign the URL or IP Address of NTP Server. The
default NTP Server used is pool.ntp.org
• Set date. Set the current date for the GXV3370.
• Set time. Set the time on the GXV3370 manually.
• Select time zone. Select the time zone for the GXV3370.
To Next Page
Loading...
Need help?
General
