GXV3370 Administration Guide
Version 1.0.1.12
P a g e | 73
Maintenance/System Diagnosis
Select the transport protocol over which log messages will be carried.
• UDP: Syslog messages will be sent over UDP.
• SSL/TLS: Syslog messages will be sent securely over TLS connection.
To upload server CA certificate, follow below steps:
✓ Copy CA file in SD card and plug it to the phone.
✓ Go to LCD menu Settings→Security Settings→Install from SD
card to install the CA file.
Configures the URI which the phone system will send the syslog messages
to. The default setting is "log.ipvideotalk.com".
Selects the level of logging for syslog. The default setting is "None". There
are 4 levels from the dropdown list: DEBUG, INFO, WARNING and
ERROR. The following information will be included in the syslog packet:
• DEBUG (Sent or received SIP messages).
• INFO (Product model/version on boot up, NAT related info, SIP
message summary, Inbound and outbound calls, Registration
status change, negotiated codec, Ethernet link up).
• WARNING (SLIC chip exception).
• ERROR (SLIC chip exception, Memory exception).
Note: Changing syslog level does not require a reboot to take effect.
Configures whether to send the SIP log to the system log server. If check,
users could filter display the obtained log file by setting up the filter
condition: syslog.msg contains "sip log:" on wireshark.
Only send the syslog with keyword, multiple keywords are separated by
comma. Example: set the filter keyword to “SIP” to filter SIP log.
Clears the log files saved in the phone system.
Configures the filter to display the specified process log file.
Selects the log priority to display. It can be selected from list below:
• Verbose (Default Setting)
• Debug
• Info
• Warn
• Error
• Fatal
Silent (suppress all output)
To Next Page
Loading...
Need help?
General
