Grandstream Networks GXV33 Series Administration Guide

GXV3370 Administration Guide
Version 1.0.1.12
P a g e | 58
the next I frame. Enabling this option will help reduce flickering in the video
when the bandwidth is limited in the network environment. The default
setting is "Yes".
Phone Settings/Multicast Paging
Multicast Paging
Paging Barge
Sets the threshold of paging calls. If the paging call’s priority is higher than
the threshold, the existing call will be hold and the paging call will be
answered. Otherwise, the existing call does not be affected. If it is set to
Disable, any paging call will not be answered. The default setting is
“Disable”.
Paging Priority Active
Determines if a new paging call whose priority is higher than the existing
paging call will be answered. If it is checked, this feature will be enabled.
The default setting is disabled.
Multicast Paging Codec
Selects the codec type for the multicast paging call. This list includes
PCMU, PCMA, G726-32, G722, and G729A/B, iLBC, Opus.
Enable Multicast Paging
Video
Enables the video feature to establish a multicast paging call. The default
setting is disabled.
Multicast Paging Video
Codec
Sets the video codec for the multicast paging call. The default setting is
“H.264”.
Multicast Paging Image
Size
Sets the video image size for the multicast paging call. This list includes
720P, 4CIF, VGA, CIF, QVGA, and QCIF.
Multicast Paging Video
Bit Rate
Determines the video bit rate for the multicast paging call. The default
setting is “256 kbps”.
Multicast Paging Video
Frame Rate
Configures the video frame rate for the multicast paging call. This list
includes “15 frames/second”, “25 frames/second”, “30 frames/second”, and
“Variable frames rate”.
Multicast Paging H.264
Profile Type
Specifies the H.264 codec profile type for the multicast paging call. This list
includes “Baseline Profile”, “Main Profile”, and “High Profile”.
Note: Lower profile is easier to decode, while higher profile has higher
compress rate. Usually, use Baseline profile for low CPU Performance
device, and choose high profile for video conference.
Multicast Paging H.264
Payload Type
Determines the H.264 codec payload type for the multicast paging call. The
default setting is “99”.
Multicast Listening
• Priority
• Listening Address
• Label
Configures the IP address and port number for monitoring multicast paging
call. When the initiator initiates a call, answer the call and display listening
address and tag of the monitoring target. This feature supports Video
Multicast, when the initiator initiates Video Multicast, it will automatically

Grandstream Networks GXV33 Series Specifications

General

Brand	Grandstream Networks
Model	GXV33 Series
Category	IP Phone
Language	English