GXV3370 Administration Guide
Version 1.0.1.12
Connection Request
Username
Enters user name for the ACS to connect to the phone.
Connection Request
Password
Enters password for the ACS to connect to the phone.
Enters the port for the ACS to connect to the phone.
Uploads Cert File for the phone to connect to the ACS via SSL.
Uploads Cert Key for the phone to connect to the ACS via SSL.
Maintenance Page Definitions
Maintenance/Upgrade
If enabled, all files will be replaced except user data.
Default is disabled.
Upload Firmware File to
Update
Allows users to load the local firmware to the phone to update the firmware.
Allows users to choose the firmware upgrade method: TFTP, HTTP,
HTTPS or Manual Upload. The default setting is “HTTP”.
Sets IP address or domain name of firmware server. The URL of the server
that hosts the firmware release. Default is “fm.grandstream.com/gs”.
Enters the user name for the firmware HTTP/HTTPS server.
Enters the password for the firmware HTTP/HTTPS server.
Checks if firmware file is with matching prefix before downloading it. This
field enables user to store different versions of firmware files in one
directory on the firmware server.
Checks if firmware file is with matching postfix before downloading it. This
field enables user to store different versions of firmware files in one
directory on the firmware server.
Click the "Update" button to check whether the firmware in the firmware
server has an updated version, if so, update immediately.
It is used to configure the download path and update mode for the
configuration file server.
• If set to "Yes", the device will set the download path of the
configuration file to “fm.grandstream.com/gs” by default and use
HTTPS protocol to connect to the server.
To Next Page
Loading...
Need help?
General
