GXV3370 Administration Guide
Version 1.0.1.12
Determines which protocol will be used to access the phone ‘s Web GUI.
It can be selected from HTTP and HTTPS. The default setting is HTTP.
Specifies which port to use to access the phone ‘s Web UI. By default, if
HTTP, the port number will be 80; if HTTPS is selected, the port number
will be 443.
Configuration via
Keypad Menu
Configures access control for keypad Menu settings on the Settings
interface of the phone.
• Unrestricted: configure all settings on the Settings interface;
• Basic Settings Only: The Advanced Settings option will not be
displayed;
• Constraint Mode: users need to input admin user password to
configure Wireless & Network and Advanced Settings.
Note: When access control for keypad is limited to “Basic Settings Only”
or “Constraint Mode”, the Admin authentication will be mandatory to start
Factory Reset process.
Permission to
Install/Uninstall Apps
Configures the permissions for users to install/uninstall the applications.
• If set to "Allow", the user is free to install/uninstall third-party apps.
• If set to "Require admin password", the user need to input the
correct administrator password to install/uninstall third-party apps.
• If set to "Require admin password if the app source is unknown",
the user need to input admin password only when install apps from
unknown source, administrator password authentication is required
when the user uninstall third-party apps.
• If set to "Not allow", the user cannot install/uninstall third-party apps.
Enter current logged-in user's password. This field is case sensitive. The
default password is "admin".
Allows the user to change the admin password. The password field is
purposely blank after clicking the “Save” button for security purpose. This
field is case sensitive with a maximum length of 32 characters.
Enter the new Admin password again to confirm.
Allows the administrator to set the password for user-level web GUI
access. This field is case sensitive with a maximum length of 32
characters. The default password is “123”.
Confirm New User
Password
Enter the new User password again to confirm.