GXV3370 Administration Guide
Version 1.0.1.12
Enable SCA (Shared Call
Appearance)
Enables/disables the Shared Call Appearance (the Broadsoft Standard)
feature for this account. If it is set to “Yes”, the phone system can update
and share account status with another device. The default setting is "No".
Enables/disables the Barge-In feature. If it is set to "Yes", the user could
tap the SCA account to barge into an active session with another shared
line. The default setting is "No".
Auto-filling Pickup
Feature Code
Sets if the phone system will add the configured feature code to retrieve
parked calls. If it is set to "Yes", the "Pickup Feature Code" configured will
be automatically prepended on the phone's dial pad when retrieving the
parked call. The default setting is "Yes". This option will be active only if
"Special Mode" is set to "Broadsoft" and "Enable SCA" is set to "Yes".
Configures the pickup feature code for call park. If "Auto-filling Pickup
Feature Code" is set to "Yes", this feature code will be automatically filled
in on the dial pad when picking up the parked call. This is used when
"Special Mode" is set to "Broadsoft" and "Enable SCA" is set to "Yes".
Defines line-seize expiration timer. For Shared Call Appearance, the
phone must send a SUBSCRIBE request for the line-seize event package
whenever a user attempts to take the shared line off hook. The default
value is 15 seconds. The valid range is from 15 to 60.
To Next Page
Loading...
Need help?
General
