Graphic Whizard PT 331SCC - Page 12

11
Cut Data Screen
The data cut screen shows the currently programmed cuts. If no cuts have been programmed, the values will
display as 0. The maximum number of programmable cuts is 32. To page through the programmed cuts, press the
Up or Down arrows on the keypad (page up / page down).
Crease Data Screen
Like the cut data screen, the crease data screen displays the programmed creases. A total of 32 creases can be
programmed. To view the programmed creases, press the Down key.
Total Sheets Screen
The totals screen can be accessed by pressing the Up or Down arrow on the keypad from the main screen. The
total sheet screen displays the total number of sheets run. It will not count sheets jammed when the machine
experiences an error or warning.
Total Crease and Cut Quantity Screen
The total crease and cut quantity screen display a count of the total number of creases and cuts.
2
1)
4
2)
6
3)
4)
8
29) 0
30) 0
31) 0
32) 0
2
1)
4
2)
6
3)
4)
8
29) 0
30) 0
31) 0
32) 0