43
Chapter 7 Maintenance
To extend the life of the PT 331SCC, regular maintenance should be performed.
User Maintenance
• For a deep clean, use the GW roller cleaner. Wash rollers with water after the roller cleaner.
• Clean Sensors with compressed air or a soft cloth.
• Check the PT 331SCC regularly for paper scraps and debris.
• Lubricate the roller bushings with a 3-in-1 oil.
• Add a touch of grease on the knife guide.
• Lubricate the knife pivot points and springs with a 3-in-1 oil after every 200,000 cuts.
• Empty the waste bin after every job or if the PT 331SCC starts jamming.
• Contact your local GW dealer for preventative maintenance and service.
To Previous Page
Loading...
