Graphic Whizard PT 331SCC - Page 7

6
No.
Description
Remark
1
Crease Depth Adjust Screw
Turn clockwise to lighten the depth, counterclockwise to deepen the
depth.
2
Cross Cutter
Cut paper in cross direction
3
Lag Wheel Set
Adjust the roller pressure
4
Slitter #1
Slit the side edge of paper
5
Slitter #2
Slit with fixed gutter, gutter is 8mm or 3/8”
6
Slitter #3
Slit with fixed gutter, gutter is 8mm or 3/8”
7
Slitter #4
Slit the other side edge of paper
8
Manual Side to Side
Adjustment
Adjust slitter side to side positions