GRAPHTEC CE5000 SERIES - Menu List

CE5000-UM-251-9370 3-2
3 OPER ATIONS
3.2 Menu List
Pressing the (PAUSE) key in READY mode displays the PAUSE menu, enabling the various settings to be
made� Select the required menu by scrolling through the list using the (NEXT) and (PREV�) keys�
CE5000-40CRP
COND. PAT.
SELF TEST
DUMP
CUT MODE
PRESS TEST CUT
MARK MODE
MARK POSITION
MARK TYPE
MARK SIZE
MARK DIST. ADJ.
MARK OFFSET
MARK SENSOR ADJ1
MARK SENSOR ADJ2
MARK AUTO SCAN
MARK SENSOR ADJ
SET BLADE GROUP
FACTOR
CLEAR GROUP
STEP SIZE ORIGIN PT
COMMAND GP-GL COMMAND HP-GL
FEED
MOVE TO R. MARK
AUTO PRE FEED
TANGENTIAL
AUTO REG. MARK
CLEAR BUFFER
AXIS ALIGNMENT
DISTANCE ADJUST
PAGE LENGTH
PLOT AREA
EXPAND
ROTATE
MIRROR
COPY
SORT
RS-232C
COMMAND
BLADE WEAR SETUP
PEN UP/DOWN
TEST
PEN UP SPEED
OFFSET FORCE
OFFSET ANGLE
STEP PASS
INIT. DOWN FORCE
LENGTH UNIT
(Special function only displayed for BLADE WEAR SETUP “ON ”)
FOLDING LINE SET