GRAPHTEC CE5000 SERIES - How to Replace the Control Panel Relay Board, LCD and Membrane Switch Panel

CE5000-UM-251-9370 6-20
6 DISASSEMBLY AND REASSEMBLY
6.2.9 How to Replace the Control Panel Relay Board, LCD and Membrane Switch Panel
How to detach the control panel relay board, LCD and membrane switch panel
(1) Detach the right side cover (see Subsection 6.1.1).
(2) DisconnecttheexiblecablesfromconnectorJ402andJ403onthecontrolpanelrelayboard.
(3) RemovetheM3L8self-tappingscrewattachingthecontrolpanelrelayboard.
Right side cover
Control panel relay board
M3L8
selt-tapping screw
(4) Detachthecontrolpanelrelayboardfromtherightsidecover.
(5) RemovetheM3L8self-tappingscrewattachingtheLCDassembly.
Right side cover
LCD assembly
M3L8 self-tapping screw
(6) Detach the LCD assembly from the right side cover.
(7) Slide the LCD and then detach the LCD from the LCD bracket.
LCD bracket
LCD assembly
LCD
Slide the LCD and then
detach the LCD from the
LCD bracket.