GRAPHTEC CE5000 SERIES - 6 Disassembly and Reassembly; Exterior Parts; How to Replace the Right Side Cover; How to Replace the Left Side Cover

CE5000-UM-251-9370 6-1
6 DISASSEMBLY AND REASSEMBLY
6 DISASSEMBLY AND REASSEMBLY
6.1 Exterior Parts
6.1.1 How to Replace the Right Side Cover
How to detach the right side cover
(1) Remove the three M4L6 binding head screws from the right side cover.
Note: Holdtherightsidecoverafteryouhavedetachedthescrews;thereisaexiblecableinsidethecover.
(2) Disconnecttheexiblecablewhichisconnectedtothecontrolpanelrelayboard.
Center cover
M3L6 TP head screw
M4L6 binding
head screw
Right side cover
Left side cover
M4L6 binding
head screw
How to reinstall the right side cover
(1) Connecttheexiblecabletothecontrolpanelrelayboard,andmounttherightsidecover.
(2) Fasten the three M4L6 binding head screws.
6.1.2 How to Replace the Left Side Cover
How to detach the left side cover
(1) Remove the three M4L6 binding head screws from the left side cover.
How to reinstall the left side cover
(1) Fasten the three M4L6 binding head screws.