GRAPHTEC CE5000 SERIES - How to Replace the Cam Sensor Board

CE5000-UM-251-9370 6-14
6 DISASSEMBLY AND REASSEMBLY
6.2.4 How to Replace the Cam Sensor Board
How to detach the cam sensor board
(1) Detach the right side cover (see Subsection 6.1.1).
(2) DisconnecttheexiblecablefromconnectorJ701onthecamsensorboard.
Cam sensor board
M3L6 binding head screw
(3) Remove the M3L6 binding head screw attaching the cam sensor board.
How to reinstall the cam sensor board
(1) Reattach the cam sensor board in the reverse order in which it was detached.