478 Kayak — User Manual
Section 7 — Sidepanel Menu Summaries
The name of the connected mainframe is displayed in a separate display
field.
The list box
Running Applications displays all known running applications of
the mainframe connected to the local sidepanel. It has a fixed number of
entries. The
Default application that is always available is the top entry. It is
followed by two user-defined applications. If less than applications are
running in a mainframe, the related place remains empty (”– – –”). The
application where the local sidepanel belongs to is marked with a hook.
The list box
Available Applications displays all applications stored on the local
hard disk. The list box has two vertical sections. At the top there is a
shortcut section that shows the last four applications loaded to a main-
frame. It is displayed in loading order with the latest one at the top. Below
there is a complete list of all applications available on the hard disk. It is
listed alphabetical.
Each entry consists of an application name, a creation date and time.
The list box
Content Overview displays the register resources of panel (MaKE
memos) and mainframe (TiM/E memo).
Function Buttons
Join
This function is used to join the local sidepanel to a running application.
The button is only relevant for the Running Applications list box.
Leave
This function is used to leave the application the local sidepanel is joined
to. Leaving an application is identical to the function ”join to default”. The
button is only relevant for the list box Running Applications list box.
Clear Content
The Clear Content button is used to delete the selected registers (MaKE
memos, TiM/E memos) in the attached panel and connected mainframe.
Figure 390. Sidepanel – Clear Content
To Next Page
Loading...
