B-6 ANALOG OUTPUT
26
ANALOG OUTPUT
This feature will allow the user to clamp the optional input signal at a
minimum or maximum signal value and output these signals for
different purposes. Use the optional External Input Signal Harness
(sold separately) and select one to use as output signal.
1. ANALOG
ANALOG INPUT
Select the channel to use for
output signal.
CLAMP VOLT
Input the minimum or maximum
clamp voltage.
LOCATED
- - - This will clamp the
CLAMP VOLT value as a
maximum voltage and
will not output any higher
signal.
- - - This will clamp the
CLAMP VOLT value as a
minimum voltage and will
not output any lower
signal.
• This feature can be used for Boost Limiter Cut for some vehicles.
2. PULSE
PULSE INPUT
Select the channel to use for output signal.
Hz / RPM
Input the minimum and maximum frequency or rpm value.
VOLT
Input the minimum and maximum converted voltage value.
Example
Set max. analog signal to 4.20V
To Next Page
Loading...
