GReddy e-01 - System Checks and LCD Settings; Meter and Signal Checks

B-8 WARNING METER
28
WARNING METER
This feature can be used to input the signal from GReddy Warning
Gauges using the optional Data Link Cable. (sold separately)
1. METER TYPE
Select the meter type.
2. UNIT
Select the unit for the selected
meter type.
B-9 SIGNAL CHECK
SIGNAL CHECK
Signal check mode
Use this feature to check and make sure that the signals are inputted
properly.
Pressure sensor voltage
Analog signal input 1
Analog signal input 2
Pulse signal input 1
Pulse signal input 2
e-01英語版03.3.1920:29ページ29