D-5 SUB INJECTOR MAP
48
Sub Injector Setting
o This feature can be used if the application requires more fuel than
the main injectors can provide.
o This feature will drive additional sub-injectors once every two rpm
signal pulse. (For 4 cyl., twice every two rev., and for 6cyl., three
times every two rev.)
o Either injector duty cycle or duration can be selected as the
numerical value in Map table.
o The injector duty cycle range is 0-100%
o A value higher than 95% entered will be displayed in RED.
Load Description %- - - Duty cycle
ms - - Duration
Engine rpm
Input a desired duty cycle or
duration in the corresponding
cells.
Load Scale
Adjustment Value: %
Input range : 0 ~ +100%, 0.5% increments
To Next Page
Loading...
