B-11 PROGRAM
31
(3) When the download is complete, turn the ignition OFF.
Important!
• Turn off the ignition and turn it back on to confirm the update.
(4) Reconnect the 12 pin Ignition harness back to the e-manage unit.
ERROR MESSAGE
If an error occur any time during the operation of the e-01, the
following message will apear.
• If the engine is running, the unit will not update. Turn the engine
off and re-update the unit.
RESET SETTING
This feature is used to reset all of the setting and the learned data.
• To initialize e-manage, see page 53 D-11 INITIALIZE.
B-12 INITIALIZE
To Next Page
