1. Important Information
Caution!
• Improper tuning of the e-Manage may cause damage to the
engine.
• GReddy Performance Products, Inc. will not be responsible for
any damage caused by improper installation or tuning.
• Tuning should be performed only by a experienced technician
who fully understands the vehicle’s fuel management and
ignition timing requirement for the engine being tuned.
• Always use a proper air/fuel ratio meter when tuning the e-
Manage.
• Installation of this product requires modification of the vehicle’s
electrical system.
• When making wire connections, be sure to remove the key from
the ignition, and disconnect the negative terminal of the battery.
• Never short out the system. It can damage the unit as well as
the vehicle’s electrical system.
• Read and fully understand the wiring diagram before making any
wire connection.
• When connecting the connector, push it in all the way until you
hear them click in together.
• The communication cable is not a repairable item, so please
take care of it. When disconnecting from the PC (laptop), pull
holding the connector. Never pull on the cord.
2
To Next Page
Loading...
Need help?
General
