2. Parts List
Important!
The Display unit is packaged with the SD card already inserted.
4
Tools required for installation:
• Voltage tester • Wire cutters
• Pliers • Screw drivers (+,-)
• 10mm wrench • Solder and Soldering iron
• Electrical tape • Zip ties
Pressure sensor Valve unit harness Pressure harness
(2.5m) (2.5m)
6ø Hose fitting x2 Hose clamp Three way fitting
Rubber washer 4ø Hose (1m) 6ø Hose (1m)
M4 Bolt M6 Bolt x2 Valve bracket
To Next Page
Loading...
