Grizzly G0513 User Manual

-22-
G0513 Series Bandsaws (Mfd. Since 07/18)
Moving & Placing
Bandsaw
Special care should be taken when moving this
bandsaw. Only use one of the following methods
to lift or move this bandsaw.
Using Eye Bolt
1. Move the crate to the prepared location, then
remove the crate from the shipping pallet.
2. Unbolt the bandsaw from the pallet.
3. Place the lifting hook through the eye bolt at
the top of the machine (see Figure 17), and
lift the bandsaw slowly with a forklift.
Figure 17. Lifting the bandsaw.
Eye Bolt
4. Remove the pallet and slowly set the bandsaw
into position.
This bandsaw is a heavy
machine. Serious personal
injury may occur if safe
moving methods are not
used. Get assistance and
use power equipment to
move the shipping crate
and remove the machine
from the shipping pallet.
Site Considerations
Floor Load
Refer to the Machine Data Sheet for the weight
and footprint specifications of your machine.
Some residential floors may require additional
reinforcement to support both the machine and
operator.
Placement Location
Consider existing and anticipated needs, size of
material to be processed through each machine,
and space for auxiliary stands, work tables or
other machinery when establishing a location for
your new machine. See Figure 16 for the mini-
mum working clearances.
Figure 16. Minimum working clearances.
32"
32"
Children and visitors may be
seriously injured if unsuper-
vised around this machine.
Lock entrances to the shop
or disable start switch or
power connection to prevent
unsupervised use.

Grizzly G0513 Specifications

General

Brand	Grizzly
Model	G0513
Category	Saw
Language	English