Grizzly G0513 User Manual

G0513 Series Bandsaws (Mfd. Since 07/18)
-43-
Disabling & Locking
Switch (G0513,
G0513ANV, G0513X2)
The switch can be disabled and locked by insert-
ing a padlock through the power button, as
shown in Figure 63. Locking the switch in this
manner can prevent unauthorized operation of
the machine, which is especially important if the
machine is not stored inside an access-restricted
building.
IMPORTANT: Locking the switch with a padlock
only restricts its function. It is not a substitute
for disconnecting power from the machine when
adjusting or servicing.
Figure 63. Switch disabled by a padlock.
Shaft
Padlock
The padlock shaft diameter is important to
the disabling function of the switch. With
any padlock used to lock the switch, test the
switch after installation to ensure that it is
properly disabled.
Disabling & Locking
Switch (G0513X2B,
G0513X2BF,
G0513X2F)
Children or untrained people can be killed
or seriously injured by this machine. This
risk increases with unsupervised operation.
To help prevent unsupervised operation,
remove the key from
the switch before
leaving machine unattended! Place key in a
well-hidden or secure location.
The power switch can be disabled and locked by
removing the key, as shown. Locking the switch
in this manner can prevent unauthorized opera-
tion of the machine, which is especially important
if the machine is not stored inside an access-
restricted building.
IMPORTANT:
Locking the power switch with a
key only restricts its function. It is not a substitute
for disconnecting power from the machine when
adjusting or servicing.
POWER
0
I

Grizzly G0513 Specifications

General

Brand	Grizzly
Model	G0513
Category	Saw
Language	English