Service Manual for Accutherm Ultra Printer D-i
D
Product Safety &
Approvals
Safety Instructions
• The terminal may only be installed by qualified, trained personnel.
• Field Service Manua
ls and Retailer Reference Guides for the terminal
are provided at the time of training.
• If the terminal
was stored in a cold environment, condensation can
occur. In order to prevent condensation, wait for the terminal to
acclimate to the temperature for 3 to 4 hours before opening the
package.
• V
erify that the terminal nominal voltage matches the voltage of the local
line to which it is being installed.
• This
terminal is equipped with a safety-tested power cable and may only
be connected to a grounded power outlet.
• Ensure that
the power outlet to which the terminal is being connected is
freely accessible.
• A
lways grip the cable plugs to remove them from outlet, never pull the
power or data cables from the sockets by the cables.
• Lay
leads and cables so that no one can stand on or trip over them.
To Next Page
Loading...