Gtech Accutherm - Self-Test Mode

Diagnostics
Service Manual for the Accutherm Ultra Printer 5-3
Self-Test Mode
Pressing the Service button on the underside of the printer activates the self-test
mode that provides several print tests, plus access to the printer configuration and
factory tests.
To access the printer test display:
1. Press and hold the Service button to
begin scrolling through the tests.
2. To select a test release the Service button at the desired test prompt,
then
follow the instructions.
The available printer test options
include the following:
• Print Test Ticket - Prints a sample ticket
• Print GTECH Ticket - Prints a GTECH sample ticket
• Configuration - Enters Configuration mode.
• User Stats – Provides information for 3 Groups
Group 1:
• Number of Line Feeds
• Characters Printed
• Cover Opens (sensor triggers)
• Paper Out (sensor triggers)
Group 2:
• Auto Cutter Cycles
• Auto Cutter Faults
• Auto Cutter ReHome
Group 3:
• Level 1 Jams
• Level 2 Jams
• Pr
int Head Test - Prints a test pattern to verify that all print elements are
working and clean.
• Marker Calibration - Verifies that the Top of Form marker sensing is
working.
• Continu
ous Print - Prints the test ticket continuously to verify stacker
functionality.