5-4 GTECH Technical Training and Support Services
Normal Operation Errors
During Normal operation, the Power LED remains on unless an error is indicated.
There are two classes of errors: soft errors and hard errors. Soft errors are
recoverable without power cycling the printer. Hard errors are not recoverable
without removing power from the printer, correcting the problem, and reapplying
power.
• Error Indicators
• Power -> Green
• Error -> Red
• Paper -> Yellow
Soft Errors
Soft errors may be recovered by the host or by opening and closing the printer
cover. All of these errors are indicated by a 5 second repeating blink pattern.
Soft Error State Indicators
Power (Green) Error (Red) Paper (Yellow)
Powering Down Fast Blink On Off
Cover Open 4 Blinks On Off
Print Head Over Temp 9 Blinks Slow Blink Off
Power Bad 2 Blinks Slow Blink Off
Out of Paper 2 Blinks On On
Jam 5 Blinks On Fast Blink
Missed Top of Form (TOF) 6 Blinks Off Fast Blink
Invalid Command 7 Blinks On Fast Blink
Paper Low Error On On Slow Blink
Paper Low On Off Slow Blink
Electronic Journal Low On Off 2 Blinks
To Next Page
Loading...