Guest Internet GIS-K1+ User Manual

Guide to Operation Copyright © Fire4 Systems, Inc., 2013. All Rights Reserved www . guest - internet . com 146
GIS-R20 gateway
connection to reset to
factory defaults
A box will open requesting a username and password. The username is reset and
the password is reset . Click on enter and the screen shown below will appear.
Reset Factor Defaults
Screen
Click on the Reset to defaults button and then wait two minutes. Finally, switch
the product power off then on and proceed to reconfigure the product using the
wizard as described in an earlier section.
Set computer
static IP to
192.168.200.2
255.255.255.0
Set browser to
192.168.200.1
To see the reset screen
Username: reset
Password: reset
Ethernet
cable to
WAN1 port

Guest Internet GIS-K1+ Specifications

General

Brand	Guest Internet
Model	GIS-K1+
Category	Gateway
Language	English