GW Instek ASR-2000 Series - Page 91

REMOTE CONTROL
91
<NR1>|CONSt|
KEEP|SWEep
Frequency mode: Constant(1) |
Keep(2) | Sweep(3)
Waveform
ARB1|ARB2|ARB3|ARB4|ARB5
|ARB6|ARB7|ARB8|ARB9|ARB
10|ARB11|ARB12|ARB13|ARB14
|ARB15|ARB16|SIN|SQU|TRI
<NR1>
Phase angle. Fixed to 0.
Return parameter
<NR2>,<NR1>|CONSt|KEEP|SWEep,<NR2>,<NR1>|
CONSt|KEEP|SWEep,<NR2>,<NR1>|CONSt|KEEP|S
WEep,ARB1|ARB2|ARB3|ARB4|ARB5|ARB6|ARB7|
ARB8|ARB9|ARB10|ARB11|ARB12|ARB13|ARB14|
ARB15|ARB16|SIN|SQU|TRI,<NR1>
Returns the step parameters in the following order:
ACV, ACV mode, DCV, DCV mode, frequency,
frequency mode, wave, phase.
Example
:SEQ:SPAR?
>+101.0000,KEEP,+0.0000,CONST,+50.0000,CONST,S
IN,0
[:SOURce]:SEQuence:STEP
Set
Query
Description
Sets or queries the current step number.
Syntax
[:SOURce]:SEQuence:STEP
{<NR1>|MINimum|MAXimum}
Query Syntax
[:SOURce]:SEQuence:STEP? [MINimum|MAXimum]
Parameter/Return
parameter
<NR1>
Step number
MINimum
Minimum step number
MAXimum
Maximum step number
Example
:SEQ:STEP 1
Sets the step number to 1.