GW Instek GPP-1326 - Page 128

GPP Series User Manual
128
Description
X ：1= CH1, 2= CH2, (4323: 3 = CH3, 4= CH4)
Example
VSET1?
Returns the CH1 output voltage setting.
Command
:SOURce[1|2]:RESistor < NRf >
Function
Set the resistor value
Description
NRf
1-1000
Example
:SOURce2: RESistor 1000
Set the resistor value as 1000Ω for CH2
Command
:SOURce[1|2]:RESistor?
Function
Queries the setting resistor value.
Example
:SOURce2: RESistor?
Queries the setting resistor value and returns the
readback value for CH2.
Command
:SOURce:CURRent:ALL?
Function
Queries the setting current value in all channnels.
Example
:SOURce:CURRent:ALL?
Queries the setting current value and returns the
readback value for all channels.
Command
:SOURce:VOLTage:ALL?
Function
Queries the setting voltage value in all channnels.
Example
:SOURce:VOLTage:ALL?
Queries the setting voltage t value and returns the
readback value for all channels.