GW Instek GPP-1326 - Page 154

GPP Series User Manual
154
Function
Sets the overall points (adopts the group numbers
of sequence parameter contructed by the actively
selected templet, which Pulse type does Not
support).
Description
<value> The overall points range from 10 to 2048.
Example
:SEQUence2:TEMPlet:POINTs 10
Sets the CH2 overall points as 10.
Command
:SEQUence[1|2]:TEMPlet:POINTs?
Function
Queries the actively set overall points.
Example
:SEQUence2:TEMPlet: POINTs?
Returns the CH2 actively set overall points.
Command
:SEQUence[1|2]:TEMPlet:RISERate <value>
Function
Sets the rising degree of ExpRise.
Description
<value> Ranges from 0 to 10.
Example
:SEQUence2:TEMPlet:RISERate 10
Sets the rising degree of ExpRise as 10 for CH2.
Command
:SEQUence[1|2]:TEMPlet:RISERate?
Function
Queries the rising degree of the actively set
ExpRise.
Example
:SEQUence2:TEMPlet:RISERate?
Returns the rising degree of the actively set ExpRise
for CH2.
Command
:SEQUence[1|2]:TEMPlet:SELect
{SINE|PULSE|RAMP|UP|DN|UPDN|RISE|FAL
L}
Function
Selects templet type.
Description
SINE|PULSE|RAMP|UP|DN|UPDN|RISE|FAL
L