GW Instek GPP-1326 - Page 56

GPP Series User Manual
56
Start
Press the F5 (More) button and then
press the F1 (Start) button. The
setting on LCD will be activated and
appears in red front color .
Use number pad to set the
parameters directly and then press
the F1 (Done) to confirm; or use
arrow keys along with scroll wheel
to complete the setting.
Points
Press the F2 (Points) button. The
setting on LCD will be activated and
appears in red front color
. Use number pad to set
the parameters directly and then
press the F1 (Done) to confirm; or
use arrow keys along with scroll
wheel to complete the setting.
Interval
Press the F3 (Interval) button. The
setting on LCD will be activated and
appears in red front color
. Use number pad to set
the parameters directly and then
press the F1 (Done) to confirm; or
use arrow keys along with scroll
wheel to complete the setting.
Inverted
Press the F4 (Inverted) button. On
(inverted) and Off (non-
inverted) appear on LCD
in turn. Simply stop at the status
which is required.
Construct
Construct
Press the F5 (Construct) to complte
construction.