H3C S3600 Series Installation Manual

Installation Manual
H3C S3600 Series Ethernet Switches Chapter 1 Product Overview
1-21
LED Mark Color Indicates
Speed Solid green
Rate information of the
10Base-T/100Base-TX
Ethernet ports and the
1000Base-X SFP ports.
Mode
LED
Mode
Duplex Solid yellow
Duplex information of
10Base-T/100Base-TX
Ethernet ports and the
1000Base-X SFP ports.
POST
running
The PWR LED
flashes green.
Flashes the POST test ID of the
failed test.
The PWR LED
flashes yellow.
POST
failed
PWR stays red
POST test ID of the failed test.
A bar rotates clockwise around
the LED.
Software
loading
The PWR LED
flashes green.
Displays “F”.
Fan
failure
The PWR LED is
solid red
Displays the unit ID in the
fabric; and displays “1” if there
is only one unit.
7-
segment
digital
LED
Unit
Unit id Button released
Flashes the POST test ID of the
failed test.
ON A 100 Mbps link is present.
Green
Flash
Data is being received/sent on
the port
Flashing yellow
(3 Hz)
The port fails POST.
Speed
OFF No link is present.
ON
The port is operating in full
duplex mode
Green
Flash
Data is being received/sent on
the port
Flashing yellow
(3 Hz)
The port fails POST.
100Base
-X SFP
port
status
LED
—
Duplex
OFF
No data is being received/sent
on the port.

H3C S3600 Series Specifications

General

Brand	H3C
Model	S3600 Series
Category	Switch
Language	English