Installation Manual
H3C S3600 Series Ethernet Switches Chapter 1 Product Overview
1-36
IV. Attributes of the 1000Base-X SFP port
The S3600-52P-PWR-SI/S3600-52P-PWR-EI provides four 1000Base-X SFP ports
numbered 49 to 52 on the front panel.
Note:
SFP modules do not support PoE.
SFP modules allow for great flexibility because they are hot swappable and user
configurable.
Table 1-5 lists the available SFP modules.
Note:
z The types of 1000Base-X SFP modules may be subject to changes without notice.
Consult H3C marketing personnel or technical support personnel to obtain the latest
information about SFP modules.
z For specifications of SFP modules, refer to H3C Low End Series Ethernet Switches
Pluggable Modules Manual.
V. Console port
The S3600-52P-PWR-SI/S3600-52P-PWR-EI provides one EIA/TIA-232 compliant
Console port for local or remote switch configuration. For the attributes, see
Table 1-4.
1.9.2 Rear Panel
I. Schematic diagram
The S3600-52P-PWR-SI/S3600-52P-PWR-EI provides an AC power socket, a DC
power socket and a grounding screw on the rear panel, as shown in
Figure 1-16.
(1) AC power socket (2) DC power socket (3) Grounding screw
Figure 1-16 Rear panel of the S3600-52P-PWR-SI/S3600-52P-PWR-EI