H3C S3600 Series - Rear Panel

Installation Manual
H3C S3600 Series Ethernet Switches Chapter 1 Product Overview
1-14
Attribute Description
Transmission distance over the
selected medium
100 m (328.08 ft) over the category-5
unshielded twisted pair (UTP) cable
IV. Console port
The S3600-52P-SI provides one EIA/TIA-232 compliant Console port for local or
remote switch configuration. For the attributes, see
Table 1-4.
V. Attributes of the 1000Base-X SFP ports
The S3600-52P-SI provides four 1000Base-X SFP ports numbered 49 to 52 on the
front panel.
SFP modules allow for great flexibility because they are hot swappable and user
configurable.
Table 1-5 lists the available SFP modules.
 Note:
z The types of 1000Base-X SFP modules may be subject to changes without notice.
Consult H3C marketing personnel or technical support personnel to obtain the latest
information about SFP modules.
z For specifications of SFP modules, refer to H3C Low End Series Ethernet Switches
Pluggable Modules Manual.
1.4.2 Rear Panel
I. Schematic diagram
The S3600-52P-SI provides an AC power socket and a grounding screw on its rear
panel, as shown in
Figure 1-6.
（1）（2）（1）（2）
(1) AC power socket (2) Grounding screw
Figure 1-6 Rear panel of the S3600-52P-SI