3-7
[Sysname] interface gigabitethernet 1/0/1
# Configure port GigabitEthernet 1/0/1 to trust the 802.1p precedence of received packets.
[Sysname-GigabitEthernet1/0/1] qos trust dot1p
Displaying and Maintaining Priority Mapping
To do… Use the command… Remarks
Display priority mapping table
configuration information
display qos map-table
[ dot1p-dot1p | dot1p-dscp |
dot1p-lp | dscp-dot1p |
dscp-dscp | dscp-lp ]
Available in any view
Display the trusted precedence
type on the port
display qos trust interface
[ interface-type
interface-number ]
Available in any view
To Next Page
Loading...
