H3C S5120-SI Series

1-23
You may use arrow keys to access history commands in Windows 200X and XP Terminal or Telnet.
However, the up-arrow and down-arrow keys are invalid in Windows 9X HyperTerminal, because they
are defined in a different way. You can press Ctrl+P or Ctrl+N instead.
Command Line Error Information
The commands are executed only if they have no syntax error. Otherwise, error information is reported.
Table 1-7 lists some common errors.
Table 1-7 Common command line errors
Error information Cause
The command was not found.
The keyword was not found.
Parameter type error
% Unrecognized command found at '^' position.
The parameter value is beyond the allowed
range.
% Incomplete command found at '^' position. Incomplete command
% Ambiguous command found at '^' position. Ambiguous command,
Too many parameters Too many parameters
% Wrong parameter found at '^' position. Wrong parameter