H3C S5120-SI Series

1-4
z A statistics object of the Ethernet statistics group is a variable defined in the Ethernet statistics
table, and the recorded content is a cumulative sum of the variable from the time the statistics entry
is created to the current time. For detailed configuration, refer to
Configuring the RMON Ethernet
Statistics Function
.
z A statistics object of the history group is the variable defined in the history record table, and the
recorded content is a cumulative sum of the variable in each period. For detailed configuration,
refer to
Configuring the RMON History Statistics Function.
Configuring the RMON Ethernet Statistics Function
Follow these steps to configure the RMON Ethernet statistics function:
To do… Use the command… Remarks
Enter system view
system-view
—
Enter Ethernet interface view
interface interface-type interface-number
—
Create an entry in the RMON
statistics table
rmon statistics entry-number [ owner
text ]
Required
z Only one statistics entry can be created on one interface.
z You can create up to 100 statistics entries for the device.
Configuring the RMON History Statistics Function
Follow these steps to configure the RMON history statistics function:
To do… Use the command… Remarks
Enter system view
system-view
—
Enter Ethernet interface view
interface interface-type interface-number
—
Create an entry in the RMON
history control table
rmon history entry-number buckets
number interval sampling-interval [ owner
text ]
Required