H3C S5120-SI Series

1-16
To do… Use the command… Remarks
Display the current blacklist of
the cluster
display cluster black-list
Display the information of
candidate devices
display cluster candidates
[ mac-address mac-address |
verbose ]
Display the current topology
information
display cluster
current-topology
[ mac-address mac-address
[ to-mac-address
mac-address ] | member-id
member-number
[ to-member-id
member-number ] ]
Display members in a cluster
display cluster members
[ member-number | verbose ]
Clear NDP statistics
reset ndp statistics
[ interface interface-list ]
Available in user view
Support for the display ntdp single-device command depends on the device model.
Cluster Management Configuration Example
Network requirements
z Three switches form cluster abc, whose management VLAN is VLAN 1. In the cluster, Switch B
serves as the management device (Administrator), whose network management interface is
VLAN-interface 1; Switch A and Switch C are the member devices (Member).
z All the devices in the cluster use the same FTP server and TFTP server on host 63.172.55.1/24,
and use the same SNMP NMS and log services on host IP address: 69.172.55.4/24.
z Add the device whose MAC address is 000f-e201-0013 to the blacklist.