32
Main Menu
5.2 Basic settings
5.3 Advanced settings
Language Selection
Language Select the working language for the instrument from the list available
Date and Time Adjustment
Date format Define the display format for the date (DD/MM/YY or MM/DD/YY)
Date Enter the day, the month and the year in the format defined above
Time format Enter the display format for the time using a 12 or 24 hour clock
Time Enter the hour and minutes in the format defined above
Backlight Management
Backlight level Enter the scale of brightness (max, comfortable, standard, economy or min)
Units Management
Pressure unit Choose the barometric pressure unit from the list available
Temperature unit Choose the temperature unit from the list available
File Measurement Management
Storage mode
Choose from a rolling buffer or store once:
• Rolling buffer: When the file is full, the latest measurement set replaces
the oldest one continuously (first-in, first-out)
• Store once: When the file is full (5,760 positions), the recording of
measurement stops
Storage interval
Define the interval for storing measurements from the list available.
The interval is in seconds with the number of hours of measurements
available shown in brackets e.g. 10s (16h) indicates measurements are
stored every 10 seconds, which will give 16 hours of continuous storage.
Note: This parameter also defines the refreshment rate for the graphic
measurement display.
Clear data Select this option to erase the measurement storage file
Communication
RS232 Check the box if the RS232 link is required
Baud rate Select the baud rate from the list available
Miscellaneous
This option allows the default measurement configuration parameters to be restored
To Next Page
Loading...
Need help?
General
