P/N 53063-30, Manual revision: B
8-7
Using Data Acquisition Features
EXPLAINING OFF-LINE DATA ACQUISITION FEATURES
Off-line data acquisition features are tools designed for the management of
information recorded during a previous autotransfusion procedure and are
not accessible during the cell saving process for safety reasons. During each
procedure parameters are automatically stored in the CS5+ memory. The
information concerning the last 10 procedures are retained in a FIFO (First
In, First Out) manner which means that a new procedure will erase the
oldest procedure.
The management of off-line information can be separated into in four cate-
gories:
! Transfer data function: allows procedure data to be transferred to the
output device.
! View data function: allows the information recorded for a selected
procedure to be displayed on the screen.
! Set time function: allows the CS5+ clock to be set to the current date
and time.
! Clear data function: allows the memory to be cleared of all data
recorded.
Accessing off-line data acquisition
These functions are available from the off-line data acquisition menu which
can be accessed during the powered on procedure.
If the CS5+ device has been powered off for more than 6 hours, the
following information will appear during the power on procedure.
Figure 8-5, Example of the Self test screen display
AFGC#DFAD#:N#$2I[2FAA
$%&88#JIRF#),#&0)&%#8)()/8)/.8#5&0?
<EFJINFD:+A
+I2$I2ED:IN
+FGG#AEKF2
9M\
+A>]#^#_"_
To Next Page
