P/N 53063-30, Manual revision: B
A-9
Providing Reference Information
29 Sensor error.
Proceed in MANUAL mode.
Analog-to-digital conversion timeout
error.
30 System error.
Software signal error.
Analog-to-digital conversion queue full
error.
31 System error.
Internal aknowledgment error.
State acknowledgment error.
32 Unexpected sensor reading.
Waste bag weigher sensor.
Check waste bag and disposable.
Waste bag weigher analog-to-digital
conversion error.
33 Unexpected line sensor reading.
Please check product quality.
Yellow/Green line sensor error.
Sensor output is out of specification.
34 Unexpected sensor reading.
Clean red cell line sensor
and disposable.
Effluent line sensor error.
Sensor output is out of specification.
35 Unexpected sensor reading.
Precisionsensor input test.
Restart machine.
If failure continues, call Haemonetics hot-
line.
Analog-to-digital converter error.
37 System error.
Air detector.
Air detector error.
*38 Waste bag full.
Please empty waste bag.
Waste bag full error.
Occurs at the moment that the waste bag
volume reaches its capacity.
*39 Clamped line detected.
Please open fluid lines.
Clamped line detected.
In empty/return, too much pressure was
sensed in the manifold due to a clamped
line.
40 Unexpected sensor reading.
Reservoir level.
Check reservoir level sensor and dispos-
able.
Level sensor analog-to-digital conversion
error.
41 Unexpected sensor reading.
Clamped line sensor.
Check valve door and disposable.
Clamped line sensor analog-to-digital
conversion error.
42 Pump error.
Incorrect pump direction detected.
Incorrect pump direction detected.
Pump was detected as turning in the
wrong direction.
Code Error message on the screen Description
To Next Page
Loading...
