Hakko Electronics Monitouch V9 Series Troubleshooting Instructions Supplement

2
2. Local Mode Screen 2-29
Local Mode Screen
10. Date/Time Setting
Pressing [Date/Time Setting] in the menu icons brings up the Date/Time Setting screen.
This screen is used to correct the date and time of the built-in clock in the V9 series unit.
*1
Set whether to use the built-in clock in the V9 series unit or the clock in the PLC by selecting [System
Setting]  [Unit Setting]  [SRAM/Clock]  [SRAM/Clock Setting]  [Use SRAM Calendar] on
V-SFT version 6.
*1 When using the built-in clock, be sure to set a battery. Otherwise, the clock time cannot be retained.
Date Setting
1. Press [Date/Time Setting] in the menu icons. The Date/Time Setting screen is displayed.
2. Select the date and month in the calendar.
Menu icons Date/Time Setting screen
• When changing the date:
Select the date to set on the calendar.
• When changing the month:
Switch the month using the [<<] and [>>] switches at the top of the calendar, or press the
month portion to display the pull-down list for months, and select a month to set.
or

Hakko Electronics Monitouch V9 Series Specifications

General

Brand	Hakko Electronics
Model	Monitouch V9 Series
Category	Monitor
Language	English