Hakko Electronics Monitouch V9 Series Troubleshooting Instructions Supplement

2-20 2. Local Mode Screen
6. SRAM Setting
Pressing [SRAM Setting] in the menu icons brings up the SRAM Setting screen.
This screen is used to format the SRAM area in the V9 series unit.
If the SRAM area allocated in the V9 series unit is different from the one configured in the
[SRAM/Clock Setting] window of V-SFT version 6, the [SRAM Setting] menu icon is changed as shown
below.
* The icon also appears when the SRAM area is occupied, the battery becomes weak or no
battery is set.
*1 When using the SRAM area, be sure to set a battery. Otherwise, the contents in the SRAM area cannot be
retained.
Item Description
SRAM Format
*1
Format
Formats the SRAM area.
For details on the formatting procedure, refer to page 2-21.
Menu icons SRAM Setting screen
When the format differs:When the format matches:
SRAM Setting screen

Hakko Electronics Monitouch V9 Series Specifications

General

Brand	Hakko Electronics
Model	Monitouch V9 Series
Category	Monitor
Language	English