1-4 3. System Menu
3. System Menu
The system menu is displayed (*) at the top of the screen by pressing the [SYSTEM] switch.
* If the system menu does not appear by pressing the [SYSTEM] switch, the [System Switch Prohibited] checkbox
is selected in the screen program (page 1-5).
There are two types of system menus as shown below:
System menu in RUN mode
System menu in Local mode
Item Description
Local / RUN Switches the operation mode between RUN and Local.
Display
Used for brightness adjustment and backlight control of the V9 series unit.
For details on the operating procedure, refer to page 1-6.
Security
Displayed only when the security function is enabled using V-SFT version 6.
For details on the operating procedure, refer to page 1-7.
* For details on the security function, refer to the V9 Series Reference Manual.
Operation Log
Displayed only when the operation log function is enabled using V-SFT version 6.
This is used for displaying the operation log viewer.
* For details on the operation log function and operation log viewer, refer to the V9
Series Reference Manual.
Storage Removal
Used for stopping access to the connected storage device.
For details on the operating procedure, refer to page 1-13.
Storage Viewer
Used for checking the information of the connected storage device, or copying, moving,
and deleting data between the connected storage devices.
For details on the operating procedure, refer to page 1-19.
To Next Page
Loading...
Need help?
General
